Floodlight

Product Selection

Technical Parameters

voltage:AC220V，50-60Hz

Protection level：IP65

Light effect：≥100 -130lm /w                                                                

Operating temperature：-40°C ~50 ℃Applicable cable 

diameter：Φ6-14mm                                                              

Inlet port specifications：G3/4 "                                                     

PF：0.92-0.98

Ra：≥75

Embalming：WF1

Product Features

1. Selection of high-quality drive, high performance, high efficiency, high stability, with short circuit, over current, over voltage, over temperature protection function;                                      

2. LED light source, long life, low power consumption, high brightness, irradiation distance, soft light, good color rendering;                         

3. Toughened glass with 8 cm depth, with anti-corrosion, impact resistance, high temperature resistance, heat upheaval and other properties;       

4. TThe aluminum shell of the lamp has a good sealing structure, the protection level is IP55     

5. Golden ratio design, solid and stable structure, multi-angle free adjustment, easy installation.

   
   

   
   

                                                                                                                                                           .

Scope Of Application

1. Widely used in factory workshops, warehouses, pharmaceuticals, textiles, dyeing and other industrial sites;

Precautions

Before installation, first carefully check the input power supply voltage, power and other parameters of the lamp to do the corresponding installation preparations.

1. First of all, arrange the various parts and accessories used in the lighting.

2. Disconnect the power supply before installation.

3. The bearing capacity of the fixed parts on the wall ceiling of the installation of the lamps should match the weight of the lamps.

4. Carry out power test in the lamp installation to confirm that the lamp can be lit.

5. Connect the wire with the lamp body to the matching power cord.

6. Make sure that the product is firmly installed, and finally turn on the power to light up.